Cut and Polished Boutique, Natural Treasure - Stone Mosaic

Posted on 2018-11-14 14:11:34



Knowledge and Tips about Stone Mosaic



Stone mosaic is a mosaic made by natural stone cutting, grinding or polishing into various specifications and shapes. It is the ancient and most traditional mosaic type. The earliest mosaic is made of small stone chips.

The stone mosaic has a pure natural texture and a very natural texture. The style is retro, simple and elegant. It is the highest grade in the mosaic family.


According to the different processing techniques, there are matte finish glossy finish and natural finish for stone mosaic . As it has variety of forms, specifications are square, bar, rounded, round and irregular plane, rough surface and so on.


The use of this material to decorate walls or floors not only preserves the natural feel of marble stone, but also enriches the pattern. Natural marble mosaic is made by machine cutting into small particles, pure hand-made, due to the durability of the mosaic material, will not peel off due to environmental time, discoloration, is a high-grade decorative products.
Pure color, elegant and generous, with durability The characteristics of never fade. Widely used in various types of architectural decoration and interior decoration, it is an ideal high-grade decorative product.




Features of small chips stone mosaic


1. Seamless, tightly structured

2. Patterns can have large changes, can be close to the pattern of glossy mosaic flower pattern

3. There are all smaller size chips and can be processed into the stone pattern

4. There will be color differences between small chips

5. Joint filling will be a little difficult




Nature characteristics


1.cost will be cheaper

2.radioactivity is very small (even smaller than glass, ceramic tiles, etc.), safe to use

3. its material characteristics make it easy to process.




Installation preparation: stone renovation


1. After finishing the flat hard-bottomed base surface, according to the overall layout design, correctly draw or draw auxiliary lines on the base surface to be installed.
To determine the specific installation location.
2. Prepare proper adhesive base material (Tab adhesive or white cement + glue and putty powder are recommended) and caulking agent (recommended use of environmental moisture-proof caulking agent).
3. Peel off liners between each sheet of mosaic sheet, but retain the mesh.


Specific installation steps


Apply adhesive: remove grease, dust and loose material from the working surface; repair surface defects; wet the working surface to no clear water; use a pre-selected, adjusted adhesive to evenly wipe the substrate. A thin layer of the base is then uniformly coated with a thicker layer of adhesive on the bottom layer.

Placement product:
After applying the adhesive with a toothed spatula, the prepared mosaic product can be placed.



Smooth surface:
In order to ensure the horizontal flatness of the installation surface and ensure that each stone block is evenly and firmly bonded, the surface of the product can be beaten with the elastic horizontal wood wrapped with fleece or sponge.


Clean the surface:
In order to keep the mosaic surface clean and do not stick binder or white cement during paving, we recommend arranging helpers to immediately clean the surface with a sponge soaked in water to prevent the binder or white cement from solidifying on the surface of the stone particles.
Stitching preparation:
After filling the product for at least 24 hours, caulking begins. If the jointing base is too dry, it can be properly moistened. Stitching:
After a suitable proportion of the sealant has been prepared, a special caulking tool is used for caulking.
1. Press the filling material into the gap completely, and the depth of the filling seam is confirmed by the designer;
2. The caulking shall be completed within 10 minutes after the completion of the caulking construction, and the caulking agent on the surface of the product shall be removed with a sponge soaked and dried;
3. After the sealant is cured (depending on the weather, about 12 hours), clean the surface of the product again with clean water.




Ok, today’s sharing is over. I hope everyone finds the favorite stone mosaic and makes their own dream house. We will not be regular in the future.
We will keep updating about the mosaic knowledge sharing, please feel free to pay attention to our official website and SNS account.
Hope the tip can help you learn more from mosaic custom making !

Have a nice day!